Nowadays, the technology of CNC milling machines is constantly developing and the functions are more perfect. Therefore, everyone has higher requirements for milling cutters on milling machines. There are many common types of milling cutters according to their uses. PCD end mills and carbide end mills are rotary tool mainly used for machining planes, steps, grooves, forming surfaces and cutting workpieces on a milling machine.
OPT cutting tools breaks when cutting in or pulling out the workpiece: it can reduce the feed amount and cutting depth, and shorten the cutting edge length to the minimum required length. During the processing, the milling cutter has these advantages:
1. Reduce the feed amount and cutting depth
2. Passivate the tool
3. Replace the clamp or collet
4. High cutting number tool changes low cutting number to improve chip removal and prevent chipping
5. Change from dry milling to wet (using cutting fluid) and use it with a vortex tube gun to reduce the temperature of the tool and prevent the tool from overheating.
If the feed direction of the wet milling feed is changed from the front to the feed from the oblique rear or horizontal direction, the coolant flow rate should be sufficient. Replacing the clamp or collet The tip of the blade is chipped: 1. Chamfer the corner by manual dressing 2.Change up milling to down milling. At the same time, we also provide PCD Inserts, PCD reamers, Woodworking tools, carbide inserts, carbide taps, carbide diils and so on. So, please consult us quickly.
